What are run-flat tyres and can any fitter work on them? +
Run-flat tyres have reinforced sidewalls that support the weight of the car even with no air pressure, allowing you to drive up to 50 miles at 30mph after a puncture. They require specialist fitting equipment and a TPMS reset after replacement. Not all garages can work on run-flat tyres, but most professional mobile fitters and tyre centres are fully equipped. Run-flat tyres are typically 20–40% more expensive than standard equivalents.
Do I need to replace all four tyres at the same time? +
No, you do not need to replace all four tyres at once unless they are all worn. It is best practice to replace tyres in pairs (both fronts or both rears) to maintain even handling. The newer tyres should always go on the rear axle for stability, even on front-wheel-drive cars. Mixing tyre brands on the same axle is not recommended but is acceptable across different axles.
What is the legal minimum tyre tread depth in the UK? +
The legal minimum tread depth in the UK is 1.6mm across the central three-quarters of the tyre, around its entire circumference. However, most motoring organisations recommend replacing tyres at 3mm, as braking performance drops significantly below this level. Driving on tyres below 1.6mm carries a fine of up to £2,500 and 3 penalty points per illegal tyre — so four bald tyres could mean a £10,000 fine and 12 points.
What is the difference between budget and premium tyres? +
Premium tyres from manufacturers like Michelin, Continental, and Bridgestone consistently outperform budget alternatives in independent braking tests — often stopping several metres shorter in wet conditions. They also tend to last longer, produce less road noise, and offer better fuel economy. For a typical family car, the difference between a budget and premium tyre is usually £25–£40 per tyre, which most drivers recoup through longer tread life.
How do I read my tyre size? +
Your tyre size is printed on the sidewall in a format like 205/55R16 91V. The first number (205) is the width in millimetres, the second (55) is the aspect ratio as a percentage of the width, R means radial construction, and 16 is the wheel diameter in inches. The number after (91) is the load index and the letter (V) is the speed rating. Your vehicle handbook and the sticker inside the driver's door frame show the correct size for your car.
Can a tyre blowout be repaired or does it need replacing? +
A tyre that has suffered a blowout almost always needs replacing. The internal structure of the tyre is usually destroyed by the sudden loss of pressure and the impact damage that follows. Even if the tyre appears intact, the sidewall and carcass will have been compromised. A tyre fitter can inspect it, but in the vast majority of cases a new tyre is the only safe option.